Voice Assistant Overview
Installing Voice Assistant
Voice Assistant Adminstrator Guide 10/08 7
Net Server
Voice Assistant requires the Net Server to run. To operate successfully, Voice Assistant must be
allowed to access the Net Server using a TCP/IP connection. The green light indicates that a good
connection to the Net Server was made. If the light is not green, click the Setup button to define
the connection as demonstrated below:
The default settings in this dialogue box will work in most situations.
The Hostname field should contain the network name (or IP address) of the Net Server PC. Some
network software packages do not allow the use of the special “Localhost” name. You may need to
use the Windows NetBIOS name (\\NetServer) or the full TCP/IP hostname
(Netserver.mycompany.com).
To Next Page
Loading...
Need help?
General