Toshiba Strata CTX - Administrator Mode Access

DKT3000 Settings
Telephone Programming Mode
Strata CTX DKT/IPT Telephone 10/04 103
Call Waiting and Camp-on Ring Tone Over Handset/
Headset Option
Call Waiting and Camp-on tones are sent to a busy telephone’s speaker to indicate that
a call is waiting. Call Waiting and Camp-on Tones can be sent, as an option, to the
telephone handset or headset, in addition to the speaker. Follow these steps to turn
handset/headset Call Waiting and Camp-on tone On/Off for a 3000-series telephone.
The default is Off.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press Feature Button 4 (FB4) to toggle On/Off.
FB4, LED On: Call Waiting tone
FB4, LED On: No Call Waiting tone
4. Press
+ROG to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Reset and Adjust the LCD Contrast
³ To adjust LCD Contrast for the LCD Telephones
1. Press
++++ROG (simultaneously).
2. Press and hold down the
0LF button, and press and release 9RO V or 9RO W
repeatedly.
Each time you press
9RO V or 9RO W, the contrast increases or decreases. There
are eight steps in either direction. To return to the middle setting, repeat “Step 1”
above.
3. Press
+ROG to reset the LCD contrast.
4. Go off-hook, then on-hook to exit the program mode.
³ To reset LCD Contrast for the DKT3014-SDL
1. Press
++++ROG (simultaneously).
2. Press
0RGH.
3. Press
0VJ so that the 0VJ LED is On.