DKT3000 Settings
Changing the Functions of the Flex and Msg Buttons (DKT3001 only)
Strata CTX DKT/IPT Telephone 10/04 105
4. Press +ROG.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone
to reset itself.
6. Connect Cordless Telephone to DKT3000 Telephone.
Changing the Functions of the Flex and
Msg Buttons (DKT3001 only)
You can change the functions of the Flex and Msg buttons on your DKT3001
telephone to be different from the defaults.
Redial/Feature Button Activation/Deactivation
Your )OH[ button has been set to act as a 5HGLDO button by default. However, you can
reprogram the
)OH[ button to work as Flexible Button, as it set in system
programming. These steps enable you to change how the button functions.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press
0VJ to toggle On/Off
0VJ LED On: )OH[ button works as Feature Button (FB3)
0VJ LED Off: )OH[ button works as a 5HGLDO button.
4. Press
+ROG to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Notes
• If you program the Flex button to work as Flexible Button 3, you can press * to
redial.
• If the Flex button is changed to function as FB3, FB3 must be assigned to a
feature by your system administrator in System Programming.
To Next Page
Loading...
