Toshiba Strata CTX - Headset Transmitter Level Adjustment

DKT3000 Settings
Headset Transmitter Level Adjustment
106 Strata CTX DKT/IPT Telephone 10/04
Msg/Feature Button Activation/Deactivation
Your 0VJ button has been set by default to work as a 0VJbutton; however, you can
reprogram it to work as Feature Button.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press
0VJ to toggle On/Off.
0VJ LED On: 0VJoperates as Feature Button
0VJ LED Off: Works as a 0VJ button.
4. Press
+ROG to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Note If the Msg button is changed to function as FB2, FB2 must be assigned to a
feature by your system administrator in System Programming.
Headset Transmitter Level Adjustment
³ To set the level of the Headset Transmitter for DKT3000-series telephones
Important! Unplug headset from modular jack of BHEU1A, when making the
setting from the table below.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press
)%,)%,)%(see table below), and check these LEDs.
4. Press
+ROG. In Off-hook, it returns to normal mode.
Table 16 Volume Level Transmitted from Headset Microphone
LEDS BHEU SW2
FB1 FB2 FB3 NORMAL (default) LOW
OFF OFF OFF +12 dB -11 dB
ON OFF OFF +8 dB -15 dB
OFF ON OFF +4 dB -19 dB
ON ON OFF 0 dB -23 dB (default)
OFF OFF ON -4 dB -27 dB
ON OFF ON -8 dB -31 dB
OFF ON ON -12 dB -35 dB
ON ON ON -16 dB -39 dB
Note ON means LED ON OFF means LED OFF