Strata CTX DKT/IPT Telephone 10/04 107
IP Telephone Settings D
This chapter explains how to enter data for your IP telephone if it was not previously
entered by the telephone installer or if you need to change this information.
Important! This chapter does not apply to the Strata CTX28.
You may also need to ask your Telephone System Administrator for the information
required for the following steps (IP address, subnet mask number, router address,
Station ID, CTX Strata Net node number, IP address for the BIPU-M1A, etc.).
Notes
You may want to enter a period or backspace when performing the following steps.
While in telephone programming mode (Press
++++ROG (simultaneously) to
enter programming mode), you can use these buttons for the following functions:
•Press
to enter a period.
•Press
9RO W to backspace.
•Press
6SNU to cancel entry and start over.
To Next Page
Loading...
