Toshiba Strata CTX - Initializing the IP Telephone

IP Telephone Settings
Initializing the IP Telephone
Strata CTX DKT/IPT Telephone 10/04 109
Important!
• The IPT2010-SD telephone cannot be used to program the system.
• On the IPT2010-SD,use SK3 (Scroll) to switch between FB1~FB10 and
FB11~FB20
Initializing the IP Telephone
CAUTION! If you initialize the IP telephone, all settings return to default.
1. Press
++++ROG (simultaneously).
2. Press
9RO Vthen press +ROG.
Note Steps 3~5 are optional.
3. Press
)% to initialize the telephone’s function settings (LED On = initialize,
LED Off = don’t initialize). See “IP Telephone Function Settings” on page 112 for
details.
4. Press
)% to initialize LCD contrast setting (LED On = initialize, LED OFF =
don’t initialize).
5. Press
)% to initialize the telephone’s IP network connection settings (LED On =
initialize, LED Off = don’t initialize). See “IPT-to-IP Network Connection
Instructions” below for details.
6. Press
+ROG again to complete the initialization process.
7. Go off-hook and hang up.