Toshiba Strata CTX - Button Labels Reference; Feature Button Definitions

User Programming
Feature Codes
Strata CTX DKT/IPT Telephone 10/04 85
Speed Dial (Storing an SD number)
Station
2
 + QQQ + Phone No.
3
+ 
nnn = 100~199 SD bin numbers
System
2
 + QQQ + Phone No.
3
+ 
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station
2
6SGLDO
4
 + QQQ
nnn = 100~199 Station SD bin numbers
System
2
6SGLDO
4
+ QQQ
nnn = 200~999 System SD bin numbers
Start Application

Travelling Class Override
Enter Code
 , then dial number (enter LCR code if required)
Change Code
 + Index Number + old Code +  + new Code + 
User Programming Mode

Voice Mail (VM)
Direct Transfer to Voice Mail
While on a call, press &QI7UQ +  . Dial VM mailbox
number (usually Ext. Number) +
 .
Volume Control - Beep
With handset off-hook, press  .  Press 9RO V or W .
Volume Control - Ringing
With handset on-hook, press  .  Press 9RO V or W .
1. If you have “hot dialing,” you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 7 on page 60 to see how to enter

and  into a speed dial number.
4. If your telephone does not have a
6SGLDO button, press the

button, then dial the three digit Speed
Dial bin number (nnn).
Table 13 Feature Access Codes (continued)
Feature
Feature Access Code Sequences
1