System
103 Class of Service
4-8 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
103 Class of Service
Prerequisite Program: None
Class of Service (COS) assignments are a registration of feature capabilities to a specific user or group of
users. Up to 32 COS feature sets can be registered.
1. Enter your COS assignments in the “COS
Record Sheet” on page D-4.
2. From the Program Menu click System >
Class of Service The Class of Service
Assignment screen displays (shown
right).
3. COS Number – Select the COS Number
(1~32).
4. Place a check mark in each of the
services you wish to enable.
5. Click Submit.
FIELD DESCRIPTION
01 Auto Busy Redial Enable Automatic Busy Redial after dialing a busy outside destination.
02 Call Forward Override Enable Call Forward Override. If enabled, this station does not forward
calls from a calling station with System or Station Call Forward
activated. This includes when dialing from the dial pad or DSS button
located on the telephone or DSS console.
03 Call Transfer w/ Camp-on Allows a call transferred by a station to Camp-on to a busy destination.
04 Change DISA Codes Enable stations to change the DISA Security Code.
05 DND Override - Calling Party Permits a caller to override the DND status of a station.
06 DND Override - Called Party Permits calling parties with DND Override privileges to override DND
status.
07 Do Not Disturb Enables user to place stations on DND mode.
08 Remote Set/Reset DND Enables stations with the ability to set/reset DND on other phones.
09 Executive Override Enable Executive Override on a call.
10 Executive Override Allowed Permit Executive Override for incoming callers.
11 Offhook Camp-on Enable Off-hook Camp-on when encountering a busy destination.
12 Group Pickup Enable stations for Group Call Pickup within one’s own group.
13 Directed Station Pickup Enable stations to pick another specific ringing station.
14 Directed Group Call Pickup Enable stations to pick up a ringing station in a specified group.