Toshiba T300MVi - Program Tab; Program Menu structure Inverters

Software A3TY07X
Page 2
November, 2019
3.6 Program Tab
The Program Tab provides a means to navigate through the ASD adjustable parameter list in the MVi-EOI.
From this area, the user can read and modify parameters used to control the ASD operation. Parameters
are displayed one per screen. Each screen consists of the group or subgroup tab, the parameter symbol,
and a description of the parameter. This EOI is used for Synchronous Motor (SM) and Induction Motor
(IM) drives. For IM drives, it is used for both Vector control and V/F control. Because of this, some
parameters that are not used will be displayed. Also, some parameters can only be viewed. The table
below lists the parameters that are available via the keypad. In this table, there are columns that indicate
whether the parameter is read only (R), read/write (R/W), or not displayed (-). If a parameter is read only,
it can not be selected by pressing the ENTER key.
3.6.1 Program Menu structure Inverters
Primary Group Sub Group 1 Sub Group 2 Keypad Name Symbol
IM
SM
Sel
list
VF Vect
Fundamental Accel/Decel Acceleration Rate 1
CR_RATE_ACC
R/W R/W R/W
Deceleration Rate 1
CR_RATE_DEC
R/W R/W R/W
Equipment
Ratings
Drive Input Voltage
Rating
CS_AC_VOLT
R R R
Drive DC Voltage
Rating
CS_DC_VOLT
R R R
Drive Output Current
Rating
CS_EQUIP_CURR
R R R
Drive Output kVA
Rating
CS_EQUIP_KVA
R R R
Drive Output Voltage
Rating
CS_EQUIP_VOLT
R R R
Drive Frame Size
CS_FRAME_SIZE
R R R
Motor Ratings Motor Current Rating
CS_MOTOR_CURR
R/W R R
Motor Frequency
Rating
CS_MOTOR_FREQ
R/W R R
Motor Pole Number
CS_MOTOR_POLE
R/W R R
Motor RPM
CS_MOTOR_RPM
R/W R R
Motor Voltage Rating
CS_MOTOR_VOLT
R/W R R
Motor kW Rating
MA_MOTOR_KW
R/W R R
Utilities * EOI Access Stop Button Mode
Flag
FLG_STOP_MODE
R/W R/W R/W
EIO Access Privilege
Level
(EOI Enable Flag)
KPAD_PRIVILEGE
R/W R/W R/W
Version Drive Software
Number
(RTC_SOFTVER)
INF_SOFTVER
R R R
I/O Analog I/O Analog
Input
Analog Input 1
Address
AIN1_AS
R/W R/W R/W 1
Analog Input 1 Gain
AIN1_GS
R/W R/W R/W
Analog Input 1 Offset
AIN1_OS
R/W R/W R/W
Analog Input 1 Type
AIN1_TYPE
R/W R/W R/W
Analog Input 2
Address
AIN2_AS
R/W R/W R/W 1