Software A3TY07X
Page 25
November, 2019
Selection List Selections Description Note
7 VDC_VN V-phase negative DC bus feedback. 10000counts=100%
VDC_WP W-phase positive DC bus feedback. 10000counts=100%
VDC_WN W-phase negative DC bus feedback. 10000counts=100%
DI_DATA1 Digital input word 1.
SSEQ_OUT1 Drive operation sequence output word 1.
SSEQ_OUT3 Drive operation sequence output word 3.
DI_DATA3 Digital input word 3.
DI_DATA4 Digital input word 4.
DI_DATA5 Digital input word 5.
CPS_FLT Filtered control power input voltage. 1count/volt
WOCD Sensorless vector control estimated speed error.
10000counts=100%
IM only
E2Q Rotor torque voltage feedback. 10000counts=100% IM only
QO
Rotor position feedback. 65536counts/360deg (2 radians)
VI_POWER Output kW 1count/kW.
VF_EDCMP Volts/Hertz field voltage reference compensation
16384counts=100%
IM only
FL_R Flux reference 10000counts=100%
VAC_FBK Average drive input voltage feedback 10000counts=100%
VF_FCMP Volts/Hertz torque feedback frequency compensation
25000counts=100%
IM only
VF_STLCMP Volts/Hertz soft stall compensation 25000counts=100% IM only
VF_VDCR_OUT Volts/Hertz DC voltage control compensation output
4000counts=100%
IM only
VF_TQZ_OUT Volts/Hertz Regeration torque control output 4000counts=100% IM only
VF_EDD Volts/Hertz field voltage reference 16384counts=100% IM only
VF_EQQ Volts/Hertz torque voltage reference 16384counts=100% IM only
IPLL_DLTQ Output voltage phase lock loop error 572counts/degree
IPLL_DLTQ_FLT Output voltage phase lock loop error w/ filter 572counts/degree
XFR_DLTQ Input voltage phase lock loop error 182counts/degree
FC_REF Exciter current reference. 4000counts=100% SM only
To Next Page
Loading...
