vi
Software A3TY07X
November, 2019
Qualified Personnel
Installation, operation, and maintenance shall be performed by Qualified Personnel Only. A Qualified
Person is one that has the skills and knowledge relating to the construction, installation, operation, and
maintenance of the electrical equipment and has received safety training on the hazards involved
(Refer to the latest edition of NFPA 70E for additional safety requirements).
Qualified Personnel shall:
Have read the entire operation manual, as well as all other manuals supplied with this product.
Be familiar with the construction and function of the ASD, the equipment being driven, and the
hazards involved.
Able to recognize and properly address hazards associated with the application of motor-driven
equipment.
Be trained and authorized to safely energize, de-energize, ground, lockout/tagout circuits and
equipment, and clear faults in accordance with established safety practices.
Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves,
hard hats, safety glasses, face shields, flash clothing, etc., in accordance with established safety
practices.
Be trained in rendering first aid.
For further information on workplace safety visit www.osha.gov.
Disposal
Never dispose of electrical components via incineration. Contact your state environmental agency for
details on disposal of electrical components and packaging in your area.
To Next Page
Loading...
