Toshiba TC-net 100 - 8 Log Save Tool; Outline of Log Save Tool

8. Log Save Tool
97
8. Log Save Tool
8.1 Outline of Log Save Tool
Log Save Tool compresses a log file (four follows) of each OPC server function and saves it
in a specified period, hard disk.
(1) OPC Server Function (Log file : TCnetOPCSvr.log, TCnetOPCSvr.org)
(2) Dual Management Function (Log file : OpcDualMng.log, OpcDualMng.org)
(3) TC-net Access Function (Log file : TCnetScanCtrl.log, TCnetScanCtrl.org)
(4) Tool I/F Function (Log file : OpcToolIfSvr.log, OpcToolIfSvr.org)
When file size exceeds 1MB a current log file (extension : log), extension is changed to
"org" from "log".
Log Save Tool detects that extension of this log file changed and executes compression
processing.
Log Save Tool change a file name before compressing it. (extension : org -> txt)
Show an example of a file name in the following.
File name : TCnetOPCSvr_100622-171052_100622-182010.txt,
OpcDualMng_100622-100905_100622-231025.txt etc.
Top date/time of stored by log file. "yymmdd-hhmmss"
Last date/time. "yymmdd-hhmmss"
In addition, at a point in time when a stop of log save process or date changed into, copy a
current log file (extension : log), and compression processes after changing a file name.
Log file compresses a period of 1 day in one file and saves it.
Show an example of a name of a compressed file in the following. (extension : cmp)
Compressed file : OPCSvrLogs_100622.cmp
The previous day or the day that a log save stopped. yymmdd
* : Log Save Tool added in V01.40.