Toshiba TE Series - 5.6.11.a Real Time Clock Settings

Basi
c
I
nsta
l
l
at
i
on and Operat
i
on G
u
i
de
T
E
Ser
i
es D
i
g
i
ta
l
S
olid
S
tate
S
o
f
t
S
tarters 1
8
–
1250A
57 | Page
F073 = Unit Frame Rating:
Read Only. Reserved for Factory Use
F074 = CT Ratio:
Read Only. This is the primary value of the TE Series internal
Current Transformers (CTs) for use in determining the GF trip
settings (F046). CTs cannot be used for external metering.
Alteration is reserved for factory use only.
 5.6.11.a Real Time Clock Settings
Functions F075 through F080 set the system real time clock. The
time clock is used for date/time stamping of the Fault History. The
clock automatically adjusts for leap years and is backed up by a
Lithium ion battery for long life.
 Note:
The time clock does not automatically adjust for daylight savings
time.
F075= Year
Factory Setting = Year of manufacture
Range = 2000 to 2047
F076 = Month
Factory Setting = Month of manufacture
Range = 1 – 12
F077 = Day
Factory Setting = Day of manufacture
Range = 1 – 31
F078 = Hour
Factory Setting = Actual (EST)
Range = 0 - 23 (12:00 midnight is hour 0)
F079 = Minute
Factory Setting = Actual (EST)
Range = 0 – 59
F080 = Second
Factory Setting = Actual (EST)
Range = 0 – 59
F081 = Firmware revision number for Factory Use
F082 -F084 = Reserved
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com