Toshiba Tosvert VF-S15 Function Manual

E6582051
- 5 -
■
Cautions for parameters
Warning
Prohibited
▼ Do not use application of writing into same parameter more than 100,000 times.
The Life of EEPROM is approximately 100,000 times. Frequent writing to the EEPROM
of inverter will cause a memory corruption.
Notes on use
Notes
▼
Do not install the inverter where the temperature or the humidity will change rapidly.
▼
Keep a distance of 20cm or more between the inverter 's power cable and the data
transmission cable.
Or the inverter might malfunction because of noise.
▼
Insert a magnetic contactor or similar device between the inverter and the power supply
to ensure that power is turned off if an emergency stop command is entered through the
network.

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)