Toshiba V Series - Page 100

80 Ethernet module User’s Manual
Chapter 5 Computer Link Protocol and the PC Link Protocol Transmission
5
(1) Defining the variables
(*========================================
EN311 PC-LINK TEST PROGRAM
========================================*)
VAR
RST_START: BOOL;
RST_CMP: BOOL;
RST_ERR: BOOL;
RST_STS: INT; (* Slot 6 Reset request error status *)
RST_CMP2: BOOL;
RST_ERR2: BOOL;
RST_STS2: INT; (* Slot 7 Reset request error status *)
CL_CMP: BOOL;
CL_ERR: BOOL;
CL_STS: INT; (* Slot 6 Parameter setup request error status *)
CL_CMP2: BOOL;
CL_ERR2: BOOL;
CL_STS2: INT; (* Slot 6 Run request error status *)
CL_CMP3: BOOL;
CL_ERR3: BOOL;
CL_STS3: INT; (* Slot 7 Parameter setup request error status *)
CL_CMP4: BOOL;
CL_ERR4: BOOL;
CL_STS4: INT; (* Slot 7 Run request error status *)
X_COMPLETE1: BOOL;
TX_ERROR1: BOOL;
TX_REQ1: BOOL;
SND_STATUS1: INT; (* Slot 6 Parameter setup request error status *)
RX_COMPLETE1: BOOL;
RX_ERROR1: BOOL;
RX_REQ1: BOOL;
RCV_STATUS1: INT; (* Slot 6 Register write request error status *)
USEND_T_1: USEND_T;
USEND_T_2: USEND_T;
USEND_T_3: USEND_T;
USEND_T_4: USEND_T;
USEND_T_5: USEND_T;
USEND_T_6: USEND_T;
USEND_T_7: USEND_T;
URCV_T_1: URCV_T;
END_VAR