Toshiba V Series User Manual

6F8C0904 29
3.6 Network Wiring Equipment
3
3.6 Network Wiring Equipment
This section describes the wiring and related equipment that makes up the network to
which the EN311 is connected. Since the EN311 conforms to the ISO 8802-3 (IEEE
802.3) standard, you should select equipment to be used in the network that also
conforms to this standard.
The following section introduces recommended wiring and related equipment. We
strongly recommend that these models be used when new items are needed.
Contact the manufacturer directly for detailed information on each equipment.
(1) 10BASE5
• Coaxial cable
• Plugs
• Terminators
• Adapters
• Grounding clamps
•AUI cable
•MAU
Catalog no. EEA-9202-[ ]M+TMJ x 2 [ ]: Length
Standard outer diameter 10.3 mm diameter, with terminators at both ends
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EPL-6213
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EEJ-6213
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EAD-6213
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EEL-6213
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. AUI15-[ ]M [ ]: Length
Standard outer diameter 6.5 mm diameter (thin wire), molded connectors
Length 1, 2, 3, 5, 10, and 15 meters
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. UI50-[ ]M [ ]: Length
Standard outer diameter 10.5 mm diameter (thick wire), molded connectors
Length 20, 30, 40, and 50 meters
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. ETR-6071 02
Manufacturer Showa Electric Wire & Cable Co., Ltd.

Toshiba V Series Specifications

General

Brand	Toshiba
Model	V Series
Category	Controller
Language	English