30 Ethernet module User’s Manual
Chapter 3 Preparing for Operation (Hardware)
3
(2) 10BASE2
• Coaxial cable
• BNC plugs
• T connectors
• Adapters
• Terminators
Catalog no. RG-58A/U
Standard outer diameter 5.0 mm diameter, with BNC plugs at both ends
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EPL-1067
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. ETS-8191
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EAD-8191
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Catalog no. EEJ-8191
Manufacturer Showa Electric Wire & Cable Co., Ltd.
Caution
• When installing a 10BASE5 or 10BASE2 network, the cabling must be handled with ade-
quate safety precautions and in accordance with all applicable standards. A qualified profes-
sional should perform installation and wiring.
See "ISO/IEC 8802-3" standard for installation environment standards.
To Next Page
Loading...
