Unified Controller Vm series TC-net (TNB) Module Instruction Manual
v
CAUTION
Prohibited
Do not touch anything other than
the operation part (setting switches
inside the module), such as the IC
parts and terminals, connectors,
and soldered surfaces inside the
module.
Doing so may result in electrostatic
breakdown of the ICs and LSIs, causing
failure. Also, an injury may occur due
to the ends of the part lead wires, or
burns may occur due to hot parts.
Prohibited
Do not disassemble or modify the
device or module.
It may cause malfunction or failure as
well as loss of safety of the device.
Prohibited
Do not forcefully bend, pull, or twist
the power cord and cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal into the
gaps of the device main body.
It may cause fire.
5. Safety Precautions on Transportation, Storage, and Disposal
CAUTION
Mandatory
Observe ordinances and rules.
When destroying the product, observe
the ordinances and rules of the local
government.
Prohibited
For transportation and storage of
the product, use a conductive bag
and packaging box.
Otherwise it will cause failure.
To Next Page
Loading...
