Toshiba Vm Series - TNB Network Parameter Setup; Registering Stations and Units in Tool

Chapter 3 Setting
6F8C1637
22
3.3.1 Network parameter setting
Set the network parameters of the TNB in the following steps.
Select the TNB from the product tree.
Select [Station] under the created system, and select [New (W)] from [File
(F)] on the menu bar.
Figure 3-3 Station registration screen
Set the station name.
Select "Vm station" from Station model name, and set the station name
("Stn1" is set in this example).
Figure 3-4 Station name setting screen