22
Supported models: Lock 210/250, Lock 500 and TOSIBOX
®
if needed and in case of a solid wire simply insert the
stripped signal wire to the correct port opening. In case
connect all needed signals. Make sure the connector is
completely plugged in and secure the connector into the
1.5 mm
2
stripping length of the conductor is 10 mm. The wire is
Supported models: Lock 210/250, Lock 500 and TOSIBOX
®
The Digital I/O state information and
menu. For signal physical properties, please refer to section
Allow Internet connection – when port voltage is set high,
Node allows Internet connections. When port voltage is set
Prevent Internet connection – when port is set high, Node
low, Internet access is allowed.
Allow VPN connections – when port voltage is set high,
Node allows incoming VPN connections from matched
Keys. When port voltage is low, VPN connections are
matched with it.
Prevent VPN connections – when port is set high, VPN
low, Node allows incoming VPN connections from matched
Keys.
To Next Page
Loading...
Need help?
General
