35
Chapter 6
¾ To diagnose using Traceroute
1 ) Choose Traceroute as the diagnostic tool to test the connectivity.
2 ) Enter the target IP Address/Domain Name of the tested host.
3 ) Click Advanced and specify the number of hops (to be reached) in the
Traceroute Max TTL (Time to Live) field. The default is 20. (Optional)
4 ) Click Start.
The figure below indicates the proper connection between the AP device and the
IP address 192.168.0.123 tested through Traceroute.
6. 3. Upgrade the Firmware
TP-LINK is dedicated to improving and richening the product features, giving you a
better network experience.
To Next Page
Loading...
