81
Chapter 14
Manage the Router
4. You can enable Night Mode if needed, and set a time period, and then the LEDs will
be off during this period.
Note: The effective time schedule for Night Mode is based on the system time of the router. Refer to Set Up System
Time to get the correct system time.
5. Click Save to make the settings effective.
14. 3. Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > System Tools > Diagnostics.
3. Enter the information with the help of page tips:
1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity;
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
To Next Page
Loading...
