MAC: Displays the MAC address of the authenticated client.
Displays the band the authenticated client is in.
Displays the name of the device to which the authenticated client is
connected
SSID: Displays the SSID the authenticated client is connected to.
SNR(dB):
Signal
to Noise Ratio, the power ratio between the received wireless
signal strength and the environmental noise strength. The bigger the
value of SNR, the better network performance the device provides.
CCQ(%):
Displays the Client Connection Quality (CCQ) of the authenticated client.
CCQ refers to the ratio of current effective transmission bandwidth and
the theoretically maximum available bandwidth. CCQ reflects the actual
link condition.
Rate(Mbps):
Displays the data rate at which the authenticated client transmits wireless
packets.
Down(Byte): Displays the throughput of the downstream data.
Up(Byte): Displays the throughput of the upstream data.
Active Time:
Displays the amount of time the client has been authenticated on the root
AP.
Action:
Click Unauthorize to stop giving authorization to the clients connected to
the wireless network.
47
To Next Page
Loading...
