TP-Link Auranet - Page 13

Typical topology in FAT mode:
Figure 2-2 Typical Topology in FIT Mode
Follow the steps below to log in to the web interface.
1. Launch a web browser, enter 192.168.0.254 in the address field and press the Enter
key.
NOTE:
To log in to the device, the IP address of your PC should be set within the same
subnet addresses of the device. The IP address is 192.168.0.x (”x” is any number
from 1 to 253). Subnet Mask is 255.255.255.0.
2. Create a new username and password for login, and then click OK.
CAP
Router
Internet
Clients
5