TP-Link Auranet - Advanced Wireless Parameters

Security Mode:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type.
Select the encryption type, including None and WPA-PSK/WPA2-PSK.
The default setting is None. Please refer to Security Mode
for details.
Advanced Settings
You can configure the advanced settings in this section. Improper configuration would
degrade the CAP’s wireless performance. With no special requirement, it is
recommended to keep the default settings.
Figure 4-8 Advanced Settings
Wireless Mode: Select the protocol standard for the wireless network.
For 2.4GHz network, it is recommended to select 802.11b/g/n, in which
way clients supporting any one of these modes can access your wireless
network.
For 5GHz network, it is recommended to select 802.11a/n or
802.11a/n/ac, in which way clients supporting any one of these modes
can access your wireless network.
Channel
Bandwidth:
Select the channel bandwidth of this device including 20MHz and 40MHz.
The default setting is Auto, which will select the
proper bandwidth
automatically according to the network need.
16