Wireless Parameter
This section displays the wireless mode, channel bandwidth, channel frequency and
WDS status of the device. Please refer to Advanced Settings
to configure the wireless
mode, channel bandwidth and channel frequency and refer to WDS Settings to
configure the WDS feature.
Figure 3-3 Wireless Parameter
Wireless Service
In this section, you can check or edit the wireless service information of the CAP.
Figure 3-4 Wireless Service
Click the button to edit the corresponding wireless service entry. You can change the
SSID, Network type and password. Check or uncheck the status box to enable or disable
the wireless service as needed.
Figure 3-5 Wireless
8
To Next Page
Loading...
