TP-Link BE7200 - Add a Range Extender as a Satellite Device

65
Chapter 12 EasyMesh with Seamless Roaming
4. Follow the page instructions to prepare your satellite router, then click DONE.
5. Click ADD. When prompted “This device has been added successfully“, click OK,
then click FINISH.
12. 2. Add a Range Extender as a Satellite Device
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > EasyMesh, and enable EasyMesh.
3. Plug in the extender next to the main router.
4. With in 2 minutes, press the WPS button on main router and on the extender. Wait
until the WPS process is complete.