9
Chapter 2
Connect the Hardware
2
Internet
Fiber-Optic Cable
PON Stick
Connect via ber
a. Connect to your PON
stick (sold separately).
b. Connect to the router’s 10Gbps SFP Port.
c. Turn on your modem, and wait
about 2 minutes for it to restart.
Internet
Ethernet Cable
b. Connect to the router’s
10Gbps Ethernet WAN Port
(recommended).
a. Turn off your modem, and
remove the backup battery if any.
Note: If your internet comes from an Ethernet outlet
instead of a modem, simply connect the router’s 10 Gbps
RJ45 port to it.
Connect via Ethernet
Keep the router vertical
1
OR
1. Connect the router’s 10 Gbps Combo port to the internet via Ethernet or fiber
network.
2. Connect the power adapter to the router and press the Power button to turn it on.
3. Wait until the LED screen cycles through graphics before moving on.
4. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet cable
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
To Next Page
Loading...
