TP-Link HX220 1 pz - Local Management

135
Chapter 16 Manage Your Mesh Device
3. Enter the old password and a new password twice (both case-sensitive).
4. Click Save to make the settings effective.
16. 7. 2. Local Management
You can control the local devices’ authority to manage the mesh device via Local
Management feature. By default all local connected devices are allowed to manage the
mesh device. You can also specify one device to manage the mesh device and enable
local management over a more secure way, HTTPS.
Follow the steps below to allow only the specific device to manage the mesh device via
the local management over HTTPS.
1. Visit http://tplinkwifi.net or http://192.168.88.1, and log in with the password you
set for the mesh device.
2. Go to Advanced > System Tools > Administration, and locate the Local Management
section.
3. Enable Local Management over HTTPS and keep the Port for HTTP and Port for
HTTPS as the default settings. Enter the IP address or MAC address of the local
device to manage the mesh device.
4. Click Save.
Now, you can manage the mesh device over both HTTP (http://tplinkwifi.net) and HTTPS
(https://tplinkwifi.net).