4
Chapter 1
Get to Know About Your DeviceDevice
1. 1. Product Overview
The Whole Home Mesh Wi-Fi AP is designed to extend your network coverage. You can
use multiple APs to create a seamless, intelligent and easy-to-configure mesh network
that covers the entire home.
The Mesh Wi-Fi system consists of a Main AP, one or more agents. The Main AP connects
to a wired router, a modem or gateway, the agents extend the wireless coverage of your
network.
1. 2. Appearance
The device has an LED that changes its behavior according to its working status, and a
WPS button, three RJ-45 Ethernet ports, a power port, and a RESET button.
Note: The appearance of the product is for illustration only, it may be different from your device, please refer to the
actual product.
WPS button
Status LED
Power slot
Reset Button
LAN PortsWAN/
You can check the device’s working status by following the LED Explanation table.
LED Explanation
Status Indication
Flashing yellow The device is starting up or resetting.
Yellow The connection quality of the device is normal.
Flashing blue The device is ready for setup.
Fast flashing blue The device is establishing a WPS or mesh connection.
Blue The device has been set up, but the internet is unavailable.
Flashing white/green The device is upgrading the firmware.
White/green The device is all set up and connected to internet.
Flashing red The device has lost connection.
To Next Page
Loading...
