56
Chapter 6
Customize Your Network Settings
Company’s Server
My PC
Switch
LAN: 192.168.88.1
192.168.88.100
LAN: 192.168.88.2
WAN: 172.30.30.100
172.30.30.1
Mesh
Device A
Mesh
Device B
1. Make sure the mesh devices use different LAN IP addresses
on the same subnet. Disable Mesh Device B’s DHCP function.
2. Visit http://tplinkwifi.net or http://192.168.88.1, and log in
with the password you set for the Mesh Device A.
3. Go to Advanced > Network > Static Routing. Select your
current WAN Interface and click Save.
4. Click Add to add a new static routing entry. Finish the settings
according to the following explanations:
How can I
do that?
To Next Page
Loading...
