User Guide 636
Configuring IPv4 IMPB IP-MAC Binding Configuration
Choose the menu SECURITY > IPv4 IMPB > IP-MAC Binding > DHCP Snooping to load the
following page.
Figure 2-3 DHCP Snooping
Follow these steps to configure IP-MAC Binding via DHCP Snooping:
1) In the Global Config section, globally enable DHCP Snooping. Click Apply.
2) In the VLAN Config section, enable DHCP Snooping on a VLAN or range of VLANs.
Click Apply.
VLAN ID Displays the VLAN ID.
Status Enable or disable DHCP Snooping on the VLAN.
3) In the Port Config section, configure the maximum number of binding entries a port can
learn via DHCP snooping. Click Apply.
Port Displays the port number.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
