11
Set Up Your Switch via HomeKit
Before You Start
How to Set Up?
• Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
• Ensure your iPhone/iPad, HomeKit device, and Apple home hub* (if any) are connected to the same Wi-Fi network.
*The hub like HomePod, HomePod mini, and Apple TV helps control your HomeKit devices remotely, share the devices with others, and
automate your devices to do tasks for you.
• To control the HomeKit-enabled device in the Apple Home app, the latest iOS or iPadOS version is highly recommended.
• Find the HomeKit QR code or numeric code on your device or in its packaging. After setup, you can save the code in Device Settings in
the Kasa Smart app.
1. Factory reset your Smart Switch.
2. Open the Apple Home app.
If you have added your smart device to the Kasa Smart app, you can go to Device Settings > Device Info in the app to nd the HomeKit
setup code and add the device to the Home app.
3. Scan the HomeKit QR code or enter the provided numeric setup code.
4. Follow the instructions in the app to complete setup.
To Next Page
Loading...
