TP-Link Kasa KS240 - Turn Off Power and Remove Wallplate; Pull Out the Old Switch

6
Wire Your Switch
Turn o the light and fan of the old switch and turn o the circuit
breaker. Remove the wallplate of your old switch and use a voltage
detector to conrm that all power is o.
Unscrew the old switch and pull it out. Use a voltage detector to
test all the wires to conrm that all power is o.
Step 1. Turn O Power and Remove the Wallplate
CAUTION
Risk of Electric Shocks - High Voltage - Disconnect power supply
at the circuit breaker before servicing.
OFF
MISE EN GARDE
Risque d'électrocution - Haute tension: débranchez l'alimentation
électrique au niveau du disjoncteur avant l'utiliser.
Step 2. Pull out the Old Switch
Fan
Light
Fan
Light