TP-Link Neffos C5L - Answer & End a Call

14Chapter 4 . Calls
2. After connected, tap -> Add call to call the second participant. The first participant will be placed on
hold.
3. When the second participant is connected, tap
-> Merge calls to start a conference call.
Make a call using speed dial
Using speed dial, you can call someone quickly by dialing a shortcut number instead of the original number.
• Make a speed dial: Go to
Phone, then press and hold the speed dial number.
• Create a speed dial: Go to
Phone -> -> Settings -> General Settings -> Speed dial settings.
The speed dial screen will display the numbers 1 through 9 (Number 1 is reserved for voicemail).
Then tap a not-set number and enter a phone number or select a contact, and then tap OK.
• Replace a speed dial: Go to
Phone -> -> Settings -> General Settings -> Speed dial settings,
press and hold the number you want to remove, then select Replace and enter a new number.
• Delete a speed dial: Go to
Phone -> -> Settings -> General Settings -> Speed dial settings,
press and hold the number you want to remove, then select Delete.
4. 2 Answer & end a call
On the incoming call screen:
Answer a call: Drag
right.
Reject a call: Drag
left.
Quick response message: Drag
upward to reject the call and select a quick response message to the
caller.
Note:
On the dialer screen, you can tap
->Settings -> General settings -> Quick responses to edit the quick reponse
message that will be sent to the receiver. Then tap OK.
End a call
When you are ready to end a call, tap
.
4. 3 Options during a call
Your phone provides a variety of functions that you can use during a call.
Adjust the call volume
You can press the volume key to increase or decrease the volume.
Listen with the speaker
You can press
to hear the caller with the speaker.