TP-Link Omada EAP620 HD User Manual

55
Monitor the SSIDs
You can monitor the SSID information of the EAP.
The following table introduces the displayed information of the SSID:
SSID Name Displays the SSID name.
Clients Displays the number of clients currently connected to the SSID.
Band Displays the frequency band the SSID is currently using.
Security Displays the security mode of the SSID.
Portal Displays whether portal function is enabled on the SSID.
VLAN ID Displays the VLAN ID of the SSID.
Guest Network Display guest network is enabled on the SSID.
Down (Byte) Displays the total download traffic since the SSID starts working.
Up (Byte) Displays the total upload traffic since the SSID starts working.

TP-Link Omada EAP620 HD Specifications

General

Frequency	2.4 GHz and 5 GHz
Antenna Type	Internal
PoE Support	802.3at PoE+
Maximum Power Consumption	12.5 W
Operating Humidity	10% to 90% non-condensing
Wireless Standards	IEEE 802.11ax/ac/n/g/b/a
Ethernet Ports	1 x Gigabit Ethernet (RJ-45) Port
Mounting	Ceiling/Wall Mounting
Wireless Functions	MU-MIMO, Band Steering, Load Balance, Airtime Fairness, Beamforming
Wireless Security	WPA, WPA2, WPA3
Management	Omada SDN
Antennas	4 × Internal Antennas
Operating Temperature	-30°C to 60°C (-22°F to 140°F)