TP-Link Omada EAP620 HD User Manual

80
To configure the system time, go to the System > Time Settings page.
The following two sections introduce how to configure the basic system time settings and
the Daylight Saving Time feature.
Configure the System Time
In the Time Settings section, you can configure the system time. There are three methods
to set the system time: Set the System Time Manually , Acquire the System Time From an
NTP Server
, and Synchronize the System Time with PC’s Clock .
Determine the way of setting the system time and follow the steps below to complete the
configurations:

TP-Link Omada EAP620 HD Specifications

General

Frequency	2.4 GHz and 5 GHz
Antenna Type	Internal
PoE Support	802.3at PoE+
Maximum Power Consumption	12.5 W
Operating Humidity	10% to 90% non-condensing
Wireless Standards	IEEE 802.11ax/ac/n/g/b/a
Ethernet Ports	1 x Gigabit Ethernet (RJ-45) Port
Mounting	Ceiling/Wall Mounting
Wireless Functions	MU-MIMO, Band Steering, Load Balance, Airtime Fairness, Beamforming
Wireless Security	WPA, WPA2, WPA3
Management	Omada SDN
Antennas	4 × Internal Antennas
Operating Temperature	-30°C to 60°C (-22°F to 140°F)