Manage the Range Extender 16
● The Range Extender is connected to the router, but Internet is not
available.
● The Range Extender is partially connected to the router. Make sure
the extender is set to obtain an IP address automatically under
Settings > Network > Network Settings.
Wi-Fi icon indicators for 2.4GHz and 5GHz:
A secure Wi-Fi connection.
A non-secure Wi-Fi connection.
Extending another Wi-Fi network
If you want to change the extender’s connection to another Wi-Fi network, you
can either go through the Quick Setup again or follow the steps below without
using the Quick Setup.
To extend another Wi-Fi network without using Quick Setup:
1) Launch a web browser and type: http://tplinkrepeater.net in the URL
field, then log in using the admin credentials.
2) Go to Settings > Wireless > Connect to Network.
To Next Page
Loading...