TP-Link RE580D - Access Control: Using Blacklist Mode

24
Chapter 5
Manage Your Extender
5. 1. Select Time Zone
1. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
2. Go to Settings > System Tools > Time Settings.
3. Select your local Time Zone from the drop-down list.
4. Click Save.
5. 2. Control LEDs
The LEDs of the extender indicate its activities and status. You can enable the Night
Mode feature to specify a time period during which the LEDs are off.
1. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
2. Go to Settings > System Tools > LED Control.
¾ To specify a time period when LEDs are off:
1. Select Night Mode.
2. Specify a time period in the LED Off Time field, and the LEDs will be off during this
period.
3. Click Save.