Manage Your Extender
¾ To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and
click Restore.
2. Wait a few minutes for the restore and reboot.
Note: During the restoring process, do not power off or reset the extender.
¾ To reset the extender to factory default settings:
1. Click Factory Restore to reset the extender.
2. Wait a few minutes for the reset and reboot.
Note:
1. During the resetting process, do not power off or reset the router.
2. We strongly recommend you backup the current configuration settings before resetting the extender.
5. 5. Change Admin Account
The account management feature allows you to change your login username and
password of the management webpage.
1. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
2. Go to Settings > System Tools > Admin Account.
3. Enter the old username and password. Then enter the new username and password
twice (both case-sensitive) and click Save.
To Next Page
Loading...
