TP-Link SG6654X - Page 17

Omada Stackable L3 Managed Switch
13Installation
Before installing the device in an EIA standard-sized, 19-inch rack, please check the efficiency of
the grounding system and the stability of the rack, then wear an ESD-preventive wrist strap, and
make sure that it has good skin contact and is well grounded. Bracket B & C have two adjustable ears,
please measure the distance between the front-post rack and the rear-post rack, and determine a
suitable mounting method from below:
Method Demonstration
Rack Distance
(For device
with a depth of
380mm)
Rack Distance
(For device
with a depth of
420mm)
Rack Distance
(For device
with a depth of
460mm)
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 1) + Bracket B (Ear
towards back)
498-640mm 538-680mm 578-720mm
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 1) + Bracket C (Ear
towards back)
477-498mm 517-538mm 557-578mm
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 2) + Bracket C (Ear
towards back)
429-477mm 469-517mm 509-557mm
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 2) + Bracket C (Ear
towards front)
410-429mm 450-469mm 490-509mm
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 3) + Bracket C (Ear
towards back)
357-410mm 397-450mm 437-490mm
Front:
Bracket D
Rear:
Bracket A (Screw Hole
Group 2) + Bracket B (Ear
towards back)
282-410mm 322-450mm 362-490mm