TP-Link SG6654X - Verify Installation

Omada Stackable L3 Managed Switch
20 Connection
Connect the RJ45 console port of the device with your computer by the console cable as the
following figure shows.
Figure 3-3 Connecting the Console (RJ45) Port
Connect the Type-C console port of the device with your computer by the Type-C cable (not
provided) as the following figure shows.
Figure 3-4 Connecting the Console (USB) Port
Note:
■
RJ45 console port and Type-C console port cannot be used concurrently. Type-C Console
port takes priority over the RJ45 console port.
■
The Type-C console port is hot-pluggable while the RJ45 console port is not. Keep the device
power off when plugging the console cable into the RJ45 console port.
■
Do not connect the console port with other ports by RJ45 cable.
3.4 Verify Installation
After completing the installation, verify the following items:
■
There should be 5 to 10 cm of clearance around the device for ventilation and make sure the air flow
is adequate.
■
The voltage of the power supply meets the requirement of the input voltage of the device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network devices.