TP-Link TD-8610 - Chapter 3. How to use; 3.1 Computer Configuration

TD-8610 ADSL2+ MODEM
6
Chapter 3. How to use
3.1 Computer Configuration
1. Configure TCP/IP component
1) On the Windows taskbar, click the Start button, and then click Control Panel.
2) Click the Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt page.
Figure 3-1
4) In the prompt page that showed below, double click on the Internet Protocol
(TCP/IP).