TP-Link TD-8610 - Chapter 1. Introduction; 1.1 Product Overview; 1.2 Main features; 1.3 Supporting protocols

TD-8610 ADSL2+ MODEM
2
Chapter 1. Introduction
Thank you for choosing the TD-8610 External ADSL2+ Modem.
1.1 Product Overview
With the excellent design of circuit and high quality production, we guarantee ADSL2+ MODEM
a high performance, very good stability and easy to use.
TD-8610 is a complete plug-and-play solution. With standard Ethernet interface, it can be
directly connected to any 10M/100M Ethernet devices, supporting Auto-MDIX.
TD-8610 not only uses html (web mode through Ethernet port) to configure the MODEM but
also use external utility software too. You can download it from our website
(http://www.tp-link.com
).
1.2 Main features
¾ High speed and asymmetry data transmit mode, adapt to wide-band internet access
¾ Point to point connection, provide safe and exclusive bandwidth
¾ Support All ADSL industrial standards
¾ Advanced DMT modulation and demodulation
¾ Firmware upgradeable
¾ Compatible with all mainstream DSLAM (CO)
¾ Real-time Configuration and device monitoring
¾ Quick response semi-conductive surge protect circuit, provides reliable ESD and
surge-protect function
¾ Supports ADSL dual latency (fast path and interleaved path)
1.3 Supporting protocols
- ANSI T1.413
- G.992.1 (G.dmt) - Annex A
- G.992.2 (G.lite) - Annex A
- G.992.3 (ADSL2) - Annex A compliant
- G.992.5 (ADSL2+) - Annex A compliant
- I.432 ATM physical layer compliant
- Supports RFC2516 (PPPoE) *
- Supports RFC1483 (EoA) (Bridged)
)
Note:
“*”Need third-party software.