Note:
Each IP address entered in the fields must be in the appropriate IPv6 form, which is eight IP octets
separated by a colon (x:x:x:x:x:x:x:x). The modem router will not accept the IP address if it is not in
this format.
3) PPPoA/PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is typically used
for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Select Static PPPoE to use a static IP address for your PPPoE connection. Please
enter the information accordingly.
30
To Next Page
Loading...
