56
Rule Unmatched: If the current rule can not match, and you select
Forward, the modem
router will skip the rule and transmit directly. If you select
Next, the modem router will find
the next filter rule (show in Filter list) to match.
IP/MAC Filter Listing: This displays the information about the MAC Filter rules.
To add a MAC Address filtering entry:
For example: If you want to block the PCs with MAC addresses 00:0A:EB:00:07:BE and
00:0A:EB:00:07:5F to access the Internet, you can configure as follows. Presume the rules are
both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).
Step 1: Select IP/MAC Filter as the Filter Type Selection.
Select the MAC as the Rule Type on the Filter screen, then you can configure the
specific rule for the example.
Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then
select the Interface
PVC0, and select the Direction Outgoing for the first rule.
Note:
If you want to make the rule take effect, please select Yes to active the rule.
Step 3: Enter the MAC Address and select the Unmatched rule as Next.
Step 4: Finally, click SAVE to save the entry.
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address
00:0A:EB:00:07:BE to access the Internet.
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You
can enter the
IP / MAC Filter Set Index to view the information about the rule.
To Next Page
Loading...
