4
Enter the modem router’s
default username and
password: admin/admin,
then click OK.
Note
If you forget the password, please refer to T2 in Troubleshooting.
Click Quick Setup and
then enter VPI/VCI values
provided by your ISP. Click
Next to continue.
Select ADSL Connection
Type and then click Next to
continue. Here we use
PPPoE as an example.
Enter the PPPoE Username
and Password provided by
your ISP. After confirming
the password, click Next to
continue.
Note
If you don’t have the VPI, VCI and Connection Type information, please
contact your ISP for this information.
Bridge mode is not recommended because it doesn’t allow Internet
access sharin
To Next Page
Loading...
