8
Chapter 2
Connect the Hardware
Use the default SSID (Wireless Network Name) and Wireless Password printed on
the included Wi-Fi Info Card or on the product label of the modem router to connect
wirelessly.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device’s screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The LED flashes quickly.
4 ) When the LED stabilizes and remains on, the client device has successfully
connected to the modem router.
n
TP-Link_Home
My Home
My Network
Home Network
TP-Link_Network
TP-Link_Test
4
POWERON/OFF
WPS
RESET
LAN1 LAN4/WANLAN2 LAN3 DSL
To Next Page
Loading...
