5
Chapter 1
Get to Know Your Modem Router
Item
Description
POWER
For connecting the modem router to a power socket via the provided
power adapter.
Power ON/OFF Button Press this button to power on or power off the modem router.
WPS Press to start a WPS synchronization.
RESET
Press and hold down for 8 seconds to reset the modem router into
factory default settings.
LAN1, LAN2, LAN3,
LAN4/WAN
For connecting the modem router to your PC or other Ethernet
network devices. In wireless router mode, the LAN4/WAN port is
used for connecting to a Cable/FTTH/VDSL/ADSL device.
DSL
For connecting the modem router to the internet. Connect the port to
the splitter or directly connect the port to the phone jack via a phone
cable. For details, please refer to Connect Your Modem Router.
Antennas
Used for wireless data transmission. Position them upright for the
best performance.
To Next Page
Loading...
