Quick-Start Guide
TP-LINK TD-W9970 Wireless ADSL2+ Modem Router
©2016 ACN Inc. All rights reserved ACN Pacic Pty Ltd ABN 85 108 535 708 Customer Service 1300 881 778 acnpacic.com
MKT-3024 05.07.2016
Step 1: Take out the following pieces of equipment from the box once you have received your “service activation
E-mail” from ACN.
Step 2: Connect Splitter
Connect the supplied splitter directly to the telephone wall socket.
Step 3: Connecting Broadband
Connect one end of the supplied phone cable to
the splitter’s modem port and the other end to the
grey DSL port on the modem.
Step 4: Connecting your landline phone
Using the existing cable that came with your landline
phone, connect one end to the phone and the other
end to the phone port in the splitter.
Setting up your TP-LINK Wireless Modem
Do not power on your modem until you have completed the steps below.
Ethernet cable TP-LINK Wireless ModemPhone cable Power adaptor Splitter
Splitter Telephone wall socket
Splitter
Splitter
Phone cable
Existing phone cableLandline phone
Modem